redhat-fuse-integration

Overview

Red Hat JBoss Fuse Integration Services provides a set of tools and containerized xPaaS images that enable development, deployment, and management of integration microservices within OpenShift.

 

There are significant differences in supported configurations and functionality in Fuse Integration Services compared to the standalone JBoss Fuse product.

Differences Between Fuse Integration Services and JBoss Fuse

There are several major functionality differences:

  • Fuse Management Console is not included as Fuse administration views have been integrated directly within the OpenShift Web Console.

  • An application deployment with Fuse Integration Services consists of an application and all required runtime components packaged inside a Docker image. Applications are not deployed to a runtime as with Fuse, the application image itself is a complete runtime environment deployed and managed through OpenShift.

  • Patching in an OpenShift environment is different from standalone Fuse since each application image is a complete runtime environment. To apply a patch, the application image is rebuilt and redeployed within OpenShift. Core OpenShift management capabilities allow for rolling upgrades and side-by-side deployment to maintain availability of your application during upgrade.

  • Provisioning and clustering capabilities provided by Fabric in Fuse have been replaced with equivalent functionality in Kubernetes and OpenShift. There is no need to create or configure individual child containers as OpenShift automatically does this for you as part of deploying and scaling your application.

  • Messaging services are created and managed using the A-MQ xPaaS images for OpenShift and not included directly within Fuse. Fuse Integration Services provides an enhanced version of the camel-amq component to allow for seamless connectivity to messaging services in OpenShift through Kubernetes.

  • Live updates to running Karaf instances using the Karaf shell is strongly discouraged as updates will not be preserved if an application container is restarted or scaled up. This is a fundamental tenet of immutable architecture and essential to achieving scalability and flexibility within OpenShift.

Additional details on technical differences and support scope are documented in an associated KCS article.

Using Fuse Integration Services

You can start using Fuse Integration Services by creating an application and deploying it to OpenShift using one of the following application development workflows:

  • Fabric8 Maven Workflow

  • OpenShift Source-to-Image (S2I) Workflow

Both workflows begin with creating a new project from a Maven archetype.

Maven Archetypes Catalog

The Maven Archetype catalog includes the following examples:

cdi-camel-http-archetype

Creates a new Camel route using CDI in a standalone Java Container calling the remote camel-servlet quickstart

cdi-cxf-archetype

Creates a new CXF JAX-RS using CDI running in a standalone Java Container

cdi-camel-archetype

Creates a new Camel route using CDI in a standalone Java Container

cdi-camel-jetty-archetype

Creates a new Camel route using CDI in a standalone Java Container using Jetty as HTTP server

java-simple-mainclass-archetype

Creates a new Simple standalone Java Container (main class)

java-camel-spring-archetype

Creates a new Camel route using Spring XML in a standalone Java container

karaf-cxf-rest-archetype

Creates a new RESTful WebService Example using JAX-RS

karaf-camel-rest-sql-archetype

Creates a new Camel Example using Rest DSL with SQL Database

karaf-camel-log-archetype

Creates a new Camel Log Example

Begin by selecting the archetype which matches the type of application you would like to create.

Create an Application from the Maven Archetype Catalog

You must configure the Maven repositories, which hold the archetypes and artifacts you may need, before creating a sample project:

Use the maven archetype catalog to create a sample project with the required resources. The command to create a sample project is:

$ mvn archetype:generate \
  -DarchetypeCatalog=https://repo.fusesource.com/nexus/content/groups/public/archetype-catalog.xml \
  -DarchetypeGroupId=io.fabric8.archetypes \
  -DarchetypeVersion=2.2.0.redhat-079 \
  -DarchetypeArtifactId=<archetype-name>

 

Replace <archetype-name> with the name of the archetype that you want to use. For example, karaf-camel-log-archetype creates a new Camel log example.

This will create a maven project with all required dependencies. Maven properties and plug-ins that are used to create Docker images are added to the pom.xml file.

Fabric8 Maven Workflow

Creates a new project based off a Maven application template created through Archetype catalog. This catalog provides examples of Java and Karaf projects and supports S2I and Maven deployment workflows.

  1. Set the following environment variables to communicate with OpenShift and a Docker daemon:

    DOCKER_HOST

    Specifies the connection to a Docker daemon used to build an application Docker image

    tcp://10.1.2.2:2375

    KUBERNETES_MASTER

    Specifies the URL for contacting the OpenShift API server

    https://10.1.2.2:8443

    KUBERNETES_DOMAIN

    Domain used for creating routes. Your OpenShift API server must be mapped to all hosts of this domain.

    openshift.dev

  2. Login to OpenShift using CLI and select the project to which to deploy.

    $ oc login
    
    $ oc project <projectname>
  3. Create a sample project as described in Create an Application from the Maven Archetype Catalog.

  4. Build and push the project to OpenShift. You can use following maven goals for building and pushing docker images.

    docker:build

    Builds the docker image for your maven project.

    docker:push

    Pushes the locally built docker image to the global or a local docker registry. This step is optional when developing on a single node OpenShift cluster.

    fabric8:json

    Generates kubernetes json file for your maven project. This goal is bound to the package phase and doesn’t need to be called explicitly when running mvn install

    fabric8:apply

    Applies the kubernetes json file to the current Kubernetes environment and namespace.

    There are few pre-configured maven profiles that you can use to build the project. These profiles are combinations of above maven goals that simplify the build process.

    mvn -Pf8-build

    Comprises of clean, install, docker:build, and fabric8:json. This will build dockerfile and JSON template for a project.

    mvn -Pf8-local-deploy

    Comprises of clean, install, docker:build, fabric8:json, and fabric8:apply. This will create docker and JSON templates and then apply them to OpenShift.

    mvn -Pf8-deploy:

    Comprises of clean, docker:build, fabric8:json, docker:push, and fabric8:apply. This will create docker and JSON templates, push them to docker registry and apply to OpenShift.

    In this example, we will build it locally by running the command:

    $ mvn -Pf8-local-deploy
  5. Login to OpenShift Web Console. A pod is created for the newly created application. You can view the status of this pod, deployments and services that the application is creating.

Authenticating Against a Registry

For multi node OpenShift setups, the image created must be pushed to the OpenShift registry. This registry must be reachable from the outside through a route. Authentication against this registry reuses the OpenShift authentication with oc login. Assuming that your OpenShift registry is exposed as registry.openshift.dev:80, the project image can be deployed to the registry with following command:

$ mvn docker:push -Ddocker.registry=registry.openshift.dev:80 \
                  -Ddocker.username=$(oc whoami) \
                  -Ddocker.password=$(oc whoami -t)

To push changes to the registry, the OpenShift project must exist and the users of Docker image must be connected to the OpenShift project. All the examples uses the property fabric8.dockerUser as Docker image user which has fabric8/ as default (note the trailing slash). When this user is used unaltered an OpenShift project ‘fabric8’ must exist. This can be created with ‘oc new-project fabric8’.

Plug-in Configuration

Plug-ins docker-maven-plugin and fabric8-maven-plugin are responsible for creating Docker images and OpenShift API objects which can be configured flexibly. The examples from the archetypes introduces some extra properties which can be changed when running Maven:

docker.registry

Registry to use for docker:push and -Pf8-deploy

docker.username

Username for authentication against the registry

docker.password

Password for authentication against the registry

docker.from

Base image for the application Docker image

fabric8.dockerUser

User used in the image’s name as user part. It must contain a / as trailing part. The default value is fabric8/.

docker.image

The final Docker image name. Default value is ${fabric8.dockerUser}${project.artifactId}:${project.version}

OpenShift Source-to-Image (S2I) Workflow

Applications are created through OpenShift Admin Console and CLI using application templates. If you have a JSON or YAML file that defines a template, you can upload the template to the project using the CLI. This saves the template to the project for repeated use by users with appropriate access to that project. You can add the remote Git repository location to the template using template parameters. This allows you to pull the application source from remote repository and built using source-to-image (S2I) method.

JBoss Fuse Integration Services application templates depend on S2I builder ImageStreams, which MUST be created ONCE. The OpenShift installer creates them automatically. For users existing OpenShift setups, it can be achieved with the following command:

$ oc create -n openshift -f /usr/share/openshift/examples/xpaas-streams/fis-image-streams.json

The ImageStreams may be created in a namespace other than openshift by changing it in the command and corresponding template parameter IMAGE_STREAM_NAMESPACE when creating applications.

Create an Application Using Templates

  1. Create an application template using command mvn archetype:generate. To create an application, upload the template to your current project’s template library with the following command:

    $ oc create -f quickstart-template.json -n <project>

    The template is now available for selection using the web console or the CLI.

  2. Login to OpenShift Web Console. In the desired project, click Add to Project to create the objects from an uploaded template.

  3. Select the template from the list of templates in your project or from the global template library.

  4. Edit template parameters and then click Create. For example, template parameters for a camel-spring quickstart are:

    Parameter Description Default

    APP_NAME

    Application Name

    Artifact name of the project

    GIT_REPO

    Git repository, required

     

    GIT_REF

    Git ref to build

    master

    SERVICE_NAME

    Exposed Service name

     

    BUILDER_VERSION

    Builder version

    1.0

    APP_VERSION

    Application version

    Maven project version

    MAVEN_ARGS

    Arguments passed to mvn in the build

    package -DskipTests -e

    MAVEN_ARGS_APPEND

    Extra arguments passed to mvn, e.g. for multi-module builds use -pl groupId:module-artifactId -am

     

    ARTIFACT_DIR

    Maven build directory

    target/

    IMAGE_STREAM_NAMESPACE

    Namespace in which the JBoss Fuse ImageStreams are installed.

     

    BUILD_SECRET

    generated if empty. The secret needed to trigger a build.

     
  5. After successful creation of the application, you can view the status of application by clicking Pods tab or by running the following command:

    $ oc get pods

For more information, see Application Templates.

Developing Applications

Injecting Kubernetes Services into Applications

You can inject Kubernetes services into applications by labeling the pods and use those labels to select the required pods to provide a logical service. These labels are simple key, value pairs.

CDI Injection

Fabric8 provides a CDI extension that you can use to inject Kubernetes resources into your applications. To use the CDI extension, first add the dependency to the project’s pom.xml file.

<dependency>
  <groupId>io.fabric8</groupId>
  <artifactId>fabric8-cdi</artifactId>
  <version>{$fabric8.version}</version>
</dependency>

Next step is to identify the field that requires the service and then inject the service by adding a @ServiceName annotation to it. For example,

@Inject
@ServiceName("my-service")
private String service.

The @PortName annotation is used to select a specific port by name when multiple ports are defined for a service.

Using Environment Variables as Properties

You can use to access a service by using environment variables to expose the fixed IP address and port. These are, SERVICE_HOST and SERVICE_PORT. SERVICE_HOST is the host (IP) address of the service and SERVICE_PORT is the port of the service.